Alternative Health And Herbs Remedies,FRUSTRATED, is it me or the Generator??

[rtstone845]

Hi Guys, Im new here, sorry for such a strong title. Heres my story. A friend Introduced me to Colloidal Silver and I thank him so much for that. I tried it and it worked. So I decided for the future for me to make my own, I went out and bought a Generator, from Health & Herbs and did according to the directions, It says "add salt" or "2-3 drops of lemon" Ok I did the lemon the first time at 1 gallon of distilled water, for 45 min. I never seen a "cloud" of smoke appear, but the solution tasted slightly metallic, Ive made batch after batch after batch, why? Because My silver is not doing nothing, Ive had my friends mock me saying "MIRACLE CURE HUH?!?" because it isnt taking care of our colds, ect. I will take silver and STILL catch a cold when exposed. But I cant understand it because I feel like I am making it right sometimes it taste metallic. Some times slight. I cant get it right, Im aggravated, been mocked getting sick and my kids are still getting sick. I have 99.9% wires that CAME with my Generator kit. I just cant figure this out and I need the perfect recipe to start making this right. I know this works! PLEASE SOMEONE Help me, drop me a email or reply,ANYTHING! I would bless you x 100000000. Well bless you anyways lol Thank you so much for reading

[kevinslack]

frist off you cant make good colloidal silver in a hour. even the colloidal silver you make with the batterys is not good enough because if you test a battery the milliamps is way to high to get you the small parts that you need to get into your blood and on cells. you need to cook up a gallon in a glass jug. i use two silver eagles for my colloidal silver and a fish pump moter to put air in the water while its cooking, and you need to use 10 milliamps and let it run for 7 days. you will have a gallon good enough to mix 6 o/z of it to a reg gallon thats how concentrated it will be. and what you make will be clear and no taste of metal to it. shine a laser threw the concentrated jug and it will be a solid red line going threw it.

[rtstone845]

Thanks so much for your reply! Here are my questions

1. I have an old fish tank motor for a small cheap plastic beta fish thing, this will work correct?.

2. So can I still use the 99.9% Silver wire that came with the kit????

3. What gives off 10 milliamps ? What are you using for cooking???

4. "you need to cook up a gallon in a glass jug"
is this cooking for 7 days straight or just heat it up to get it started, take it off the stove then set wires up ect. to cook for 7 days?

5. Cooking? Cook to a certain temperature or anything is fine?

I really am so eager to do whatever, i got everything down except how to cook it with, with what . Thanks so mucchhhh you don't even know, so tired of being sick, so tired of being mocked. Thanks a bunch!!!!

[kevinslack]

your fish pump motor will work, yes you can use the wire you got with your kit. to get 10 milliamps you will need to reduce the power comeing out of your transformer by using resisters, you can go to radio shack and buy them. my transformer was putting out 100 milliamps so it took three resisters to get it down to 10 milliamps. i dont heat my water up i just use it at room temp. and i cook it for 7 days with out shutting it down. on the 7th day you can shine a laser threw it and should see a red line threw the colloidal silver. it will be good enough to mix 6 o/z of it to one gallon of water. i also filter my colloidal silver.

[rtstone845]

for the fish tank motor, do I buy a new filter or do i use without a filter?
- The plastic does not conduct anything with the silver ?

My kit has 3 9Volt Batteries tied together, lol they wont be dead by day 7 of usage???

And to filter the water, a coffee filter would work? Organic filters/Natural?

thanks!

[rtstone845]

Looking up resistors online I found this:

There are four main types of resistor: carbon, film, wirewound, and semiconductor.

Of which do I use?

I have a radioshack here, but do i need to be specific when asking for the resistors and transformers, what do I say without mentioning colloidal silver to get the right peices? Im attaching these things to my (3) 9v batteries also ,correct?

How do you test for 10Milliamps (volt meter)? And the finaly result of silver do you know how strong it will be based by PPM??

[kevinslack]

yes you use a volt meter to see how many milliamps you are produceing. and i use a brita water filter which is the one people use for there drinking water. cost about $60.00 i willtry to post pictures so you can see what i got. everybody has transformers around there house from something. you just keep adding the resistors to the + wire intil you get it down to where you want it. i had to add three for the one i have. ok i cant add pictures because it said they were to big. the resistors i got say on package 271-1124 pkg. of 5 for about $2.00 the package also says 4.7k-ohm resistors 1/2 watt.5% tolerance. if you want to send me a email at litarex@msn.com i will return your email with pictures.